Fujitsu M3093EX Процедури встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Процедури встановлення для Сканер Fujitsu M3093EX. Fujitsu M3093EX 3 сторінки. Departmental document scanner
Також для Fujitsu M3093EX: Посібник оператора (50 сторінок), Брошура (2 сторінок), Брошура та технічні характеристики (2 сторінок), Інструкція з очищення Посібник з очищення (12 сторінок)

Fujitsu Video Scanner Installation Procedures

If your model has the old style "L" bracket shipping lock.

3. Slide the scanner to its side as shown in figure below.

4. Unscrew the retainer screw and remove the shipping bracket.

5. Place the shipping bracket in the "use position" slot and secure it with the retainer

screw (see figure below)

6. Place scanner back in its normal position

Special note: The M3099A\EX\EH and M4099D do not have a shipping lock.

Step D: Connecting the Scanner.

Warning! Before proceeding ensure that the power is off when connecting or disconnecting the

SCSI cable to the scanner or workstation. Failure to follow the procedure above could result in

damage to the Video card, scanner, and/or your system.

Connect the tail of the "Y" which has the largest connector to the port on the controller

that you installed in the PC. Next connect the RS-232(serial) connector to the RS-232

port on the scanner. Lastly connect the remaining connector (video) to the video port of

the scanner and ensure that all connections are securely fastened.

Rev051806A

Windows 98SE\ME\2000\XP

Page 2 of 3