Fujitsu M3096E+ Посібник оператора - Сторінка 44
Переглянути онлайн або завантажити pdf Посібник оператора для Сканер Fujitsu M3096E+. Fujitsu M3096E+ 45 сторінок. Image scanner
CHAPTER 6
CLEANING
6.1
Cleaning
Document
Cover and Document
Board
Glass
6.2
Cleaning
the ADF Section
6.1
Cleaning
Document
Cover and Document
Board Glass
Use the dry cloth or neutral clenser to remove dirt from the cover, grass, document
cover, and document holding pad. Do not are arganic solvents such as thinner.
6.2
Cleaning
the ADF Section
When the following matter often occurs using the ADF, clean the ADF sccording to
the cleaning procedure.
l
Documents is not fed smoothly or certainly.
l
Several documents is fed in a same time.
0
Reading result is not so good.
@
Open the ADF section. (Refer to section 4.5, @I to 6)
Q
Use the dry cloth or isopropyl alcohol to softly remove dirt and dust as follows.
l
Pad:
Cleaning direction is upper to lower.
Be careful not to hooking the pick spring when cleaning.
l
Glass
:
Cleaning direction is right to left.
Be careful not to hooking the sensor arm when cleaning.
0
Pick roller
l
Feed roller
>
Cleaning softly not to the surface of roller damage.
0
Exiting roller
l
Guide shaft (White colored six-sided shaft)
:
Do not press the shaft so strong. So that the shaft is bend, because
reading quality reduces.
@
Close the ADF section. (Refer to section 4.5,8
to a)
50FH5020E-01
6-l