Fujitsu M3097G Plus Посібник з інсталяції Посібник з інсталяції - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з інсталяції Посібник з інсталяції для Сканер Fujitsu M3097G Plus. Fujitsu M3097G Plus 7 сторінок. Scsi scanner installation procedures for windows nt 4.0
Також для Fujitsu M3097G Plus: Посібник з інсталяції Посібник з інсталяції (9 сторінок), Процедура встановлення (5 сторінок)

Fujitsu SCSI Scanner Installation Procedures

11. For Windows 2000 or XP scroll down to the "Enter key word or quoted phrase" box

and type in "aspi".

12. Next scroll down to the drivers section, click on ASPI_v470 or higher and follow the

prompts to download it.

13. Afterwards go to that folder and unzip the file to the default Adaptec\ASPI folder.

14. Then go to start, run, browse to the Adaptec\ASPI folder, select ASPIINST.EXE and

run it.

15. When the message "ASPI is up to date" appears, reboot and go to the next step.

Step C: Installing the drivers from the Setup CD.

To begin it is recommended that you install the drivers first before connecting the scanner.

Installing the STI-Twain driver.

1. Insert the Scanner Setup CD into your CD Rom.

2. Next please complete the pre-registration box when it appears and click the submit

button.

3. Afterwards close your browser and click the Install Products button on the Scanner

Setup Menu.

4. On the next screen click on Twain Driver and you may be presented with the option

to install the Error Recovery Guide.

5. After you have installed the Error Recovery Guide (or not) follow the prompts to

complete the twain driver installation.

6. Do not reboot at this time!

Installing the ASPI-Twain driver.

Some of our scanners are not supported by the STI-Twain drivers. For those units you

must install the ASPI-Twain driver. Please refer to the driver download page to see if

your model is one of them.

7. Insert the Scanner Setup CD into your CD Rom.

8. Next please complete the pre-registration box when it appears and click the submit

button.

9. Afterwards close your browser and click the Install Products button on the Scanner

Setup Menu.

10. On the next screen click on Twain Driver and you may be presented with the option

to install the Error Recovery Guide.

11. After you have installed the Error Recovery Guide (or not) follow the prompts to

complete the twain driver installation.

12. Do not reboot at this time!

Installing the ISIS driver.

13. Next go back to the Scanner Setup Menu and click on ISIS Driver.

14. If you didn't install the Error Recovery Guide during the Twain driver installation you

will be asked again. Proceed and follow the prompts to complete the ISIS driver

installation.

15. Do not reboot at this time!

Rev051906A

Windows 95\98\98SE\ME\2000\XP

Page 2 of 7