Brother DCP-377CW Посібник з швидкого налаштування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother DCP-377CW. Brother DCP-377CW 39 сторінок. Inkjet dcp/mfc
Також для Brother DCP-377CW: Перелік деталей для довідки (32 сторінок), Посібник з швидкого налаштування (29 сторінок)
![Brother DCP-377CW Посібник з швидкого налаштування](/uploads/products/server2/2439514/2439514.png)
2
Load plain A4 paper
a
Pull the paper tray
machine.
b
Lift the output paper tray cover a.
1
c
With both hands, gently press and slide the
paper side guides
guide
to fit the paper size you are loading in
b
the tray.
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
2
completely out of the
a
1
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
IMPORTANT
DO NOT push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g
Close the output paper tray cover a.
b
h
Slowly push the paper tray completely into the
machine.
1