Fujitsu S1500 - ScanSnap Deluxe Bundle Заходи безпеки - Сторінка 8

Переглянути онлайн або завантажити pdf Заходи безпеки для Сканер Fujitsu S1500 - ScanSnap Deluxe Bundle. Fujitsu S1500 - ScanSnap Deluxe Bundle 9 сторінок. Color image scanner
Також для Fujitsu S1500 - ScanSnap Deluxe Bundle: Посібник для початківців (8 сторінок), Технічні характеристики (3 сторінок), Брошура та технічні характеристики (2 сторінок), Посібник для початківців (9 сторінок), Як користуватися (4 сторінок)

For ScanSnap S1300 Users

■ Bus Power Use Restrictions

When using a computer as the power supply for the ScanSnap:

The ScanSnap does not work properly if you connect it to a non-powered USB hub.

The ScanSnap does not work properly if you connect it to the USB port of a PC card.

The ScanSnap may not work properly if you connect the USB bus power cable and USB cable to

different computers or powered USB hubs.

The ScanSnap may not work properly if you connect another USB-powered device to any of the

USB ports of the computer.

Depending on the USB power supply capability of the computer, other USB-powered devices con-

nected to the computer may be affected.

Regulatory Information

FCC Declaration

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

document, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is located.

Consult your dealer or an experienced radio/TV technician.

FCC warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTICE

The use of a shielded interface cable is required to comply with the Class B limits of Part

15 of FCC rules. The length of the power cable must be 3 meters (10 feet) or less.

Canadian DOC Regulations

This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus

set out in the Radio interference Regulations of the Canadian Department of Communications.

This Class B digital apparatus complies with Canadian ICES-003.

Le présent appareil numérique n'émet pas de parasites radioélectriques dépassant les limites

applicables aux appareils numériques de la classe B et prescrites dans le Règlement sur le brouillage

radioélectrique dictées par le Ministère des Communications du Canada.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.