Brother DCP-9045CDN Посібник з швидкого налаштування - Сторінка 22
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother DCP-9045CDN. Brother DCP-9045CDN 32 сторінки. Scan to ftp (file transfer protocol)
Також для Brother DCP-9045CDN: Брошура та технічні характеристики (4 сторінок), Посібник (7 сторінок), Чистка та догляд (7 сторінок), Посібник з експлуатації (10 сторінок), Посібник із швидкого старту (10 сторінок)
Друкувати сторінку
STEP 2
Installing the Driver & Software
For USB Interface Cable Users
3
For Mac OS
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 9.
Note
For Mac OS
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Connect the USB interface cable to your
computer, and then connect it to the machine.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
Note
Make sure that the machine is turned on by
connecting the power cord.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
20
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users, upgrade to
®
X, visit
®
.
4
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
Note
Please see the Software User's Guide on the CD-
ROM to install the PS driver.
5
The Brother software will search for the Brother
device. During this time the following screen
will appear.
6
When this screen appears, click OK.
®
For Mac OS
X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 11.
®