Fujitsu ScanSnap iScanner fi-6010N Посібник для початківців - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для початківців для Сканер Fujitsu ScanSnap iScanner fi-6010N. Fujitsu ScanSnap iScanner fi-6010N 45 сторінок. Network adf scanner
Також для Fujitsu ScanSnap iScanner fi-6010N: Технічні характеристики (2 сторінок), Посібник для початківців (21 сторінок), Брошура та технічні характеристики (2 сторінок), Посібник для початківців (21 сторінок), Інструкції з очищення (2 сторінок), Інструкції з очищення (2 сторінок)

Fujitsu ScanSnap iScanner fi-6010N Посібник для початківців

Introduction

Thank you for purchasing the fi-6010N Network
Scanner.
This easy-to-operate network scanner is used to scan
documents for further use.

■ Manuals

The following manuals are prepared for the
scanner. Read them as needed.
Manual
fi-6010N Net-
work Scanner
Getting Started
(This Manual)
(paper)
fi-6010N Net-
work Scanner
Operator's
Guide (PDF)
Scanner Cen-
tral Admin
User's Guide
(PDF)

■ Regulatory Information

FCC Declaration
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful
Description
Provides useful and detailed
information on setting up,
connecting, and caring for
your scanner.
Read this manual first.
Contains further information
about scanner settings, scan-
ner administration, and scan-
ner operations, and may be
used as a general reference.
To read the manual, down-
load it from the scanner. For
more details about how to
download the manual, refer
to "Chapter 5 Downloading
the Manual" (page15).
In this guide, it is indicated
as "Operator's Guide".
Provides information about
scanner central manage-
ment operations and set-
tings. Read it as needed.
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is located.
Consult your dealer or an experienced radio/TV
technician.
FCC warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
The use of a shielded interface cable
ATTENTION
is required to comply with the Class B
limits of Part 15 of FCC rules.
The length of the AC cable must be 2
meters (6.6 feet) or less.

Canadian DOC Regulations

This digital apparatus does not exceed the Class B
limit for radio noise emissions from digital
apparatus set out in the Radio interference
Regulations of the Canadian Department of
Communications.
This Class B digital apparatus complies with
Canadian ICES-003.
Le présent appareil numérique n'émet pas de
parasites radioélectriques dépassant les limites
applicables aux appareils numériques de la classe
B et prescrites dans le Règlement sur le brouillage
radioélectrique dictées par le Ministère des
Communications du Canada.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
iii