Brother HL-3045CN Посібник з швидкого налаштування - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother HL-3045CN. Brother HL-3045CN 29 сторінок. Digital color printer
Також для Brother HL-3045CN: Технічні характеристики (2 сторінок)
Друкувати сторінкуWired Network
For Wired Network Interface Cable Users
Connect the printer to
8
your Macintosh and
install the driver
a
Connect the network interface cable to the LAN
connector marked with a
connect it to a free port on your hub.
b
Make sure the printer power switch is on.
c
Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
d
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
It may take a few minutes for installation to
complete.
e
symbol and then
• If there is more than one of the same model
• You can find your machine's MAC Address
f
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
If you use a specified IP Address for the machine,
you must set the Boot Method to Static by using
the BRAdmin Light. For more information, See
Configuring your machine for a network in the
Network User's Guide.
Macintosh
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
Note
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name.
(Ethernet Address) and IP Address by printing
out the Printer Settings Page. See Print the
Printer Settings Page on page 16.
When this screen appears, click Next.
Note
The installation is now
Finish
complete.
Note
15