Fujitsu ETERNUS DX S3 Series Посібник з конфігурації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Зберігання Fujitsu ETERNUS DX S3 Series. Fujitsu ETERNUS DX S3 Series 38 сторінок. Hybrid storage systems, all-flash arrays, power synchronized unit
Також для Fujitsu ETERNUS DX S3 Series: Посібник з конфігурації (16 сторінок), Заходи безпеки (12 сторінок)
Друкувати сторінку
Chapter 3
Notes
3.3
Fibre Channel Switch Notes
3.3
Fibre Channel Switch Notes
The Fibre Channel switches that can be connected depend on the connection configuration that is used (the
OS and the ETERNUS DX/AF). Refer to the "Server Support Matrix for FC-SWITCH" before starting.
When a Fibre Channel switch (ETERNUS SN200 series, Brocade series) is to be used between the server and
ETERNUS DX/AF, follow the preparation-in-advance and Fibre Channel switch setup procedures given in the
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings".
If AIX server is connected to a Fibre Channel switch, the Fibre Channel switch port link speed must be set.
•
Set the link speed of the Fibre Channel switch ports according to the link speeds of the server-side Fibre
Channel cards, as follows:
Combination of devices
Maximum link speed of Fibre Channel
card
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
If the devices being connected together both have automatically set link speeds, the resulting link speed
may be less than optimal. The default link speed setting for Fibre Channel switch ports is "Automatic". The
link speed setting of a true IBM Fibre Channel card cannot be changed to other than "Automatic", so the
Fibre Channel switch port link speeds must be fixed to match the actual speed of the server-side Fibre
Channel cards, as per the above table, so that the same link speed is always used.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
Maximum link speed of the Fibre
Channel switch
32Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
32Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
32Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
32Gbit/s
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
12
Copyright 2018 FUJITSU LIMITED
Set the Fibre Channel switch port link
speed to...
16Gbit/s fixed
16Gbit/s fixed
8Gbit/s fixed
4Gbit/s fixed
—
8Gbit/s fixed
8Gbit/s fixed
8Gbit/s fixed
4Gbit/s fixed
2Gbit/s fixed
—
4Gbit/s fixed
4Gbit/s fixed
4Gbit/s fixed
2Gbit/s fixed
—
—
2Gbit/s fixed
2Gbit/s fixed
2Gbit/s fixed
P3AM-3782-23ENZ0