Brother MFC-5460CN Посібник з налаштування - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з налаштування для Сервер друку Brother MFC-5460CN. Brother MFC-5460CN 23 сторінки. Mfc-5460cn; mfc-5860cn
Також для Brother MFC-5460CN: Посібник з швидкого налаштування (34 сторінок), Посібник з швидкого налаштування (34 сторінок), Посібник з експлуатації (9 сторінок), Посібник з швидкого налаштування (21 сторінок)

Друкувати сторінку
Brother MFC-5460CN Посібник з налаштування
Installing the Driver & Software
6
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
7
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs/Brother/XXX-XXXX (where
xxx-xxxx is your model name).
The MFL-Pro Suite has been installed
completely.
Note
MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
ScanSoft™ PaperPort™ 11SE. ScanSoft™
PaperPort™ 11SE is a document management
application for scanning and viewing documents.
For DCP-7020, DCP-8060, DCP-8065DN,
MFC-7220, MFC-7225N, MFC-8460N, MFC-8660DN
and MFC-8860DN users
(The illustrations are based on DCP-8060.)
1
Connect the USB interface cable to your PC,
and then connect it to the machine.
2
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
3
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
®
Windows
7