Brother MFC-8460N Посібник з швидкого налаштування - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother MFC-8460N. Brother MFC-8460N 41 сторінка. Scan to ftp (file transfer protocol)
Також для Brother MFC-8460N: Посібник користувача (8 сторінок), Посібник з налаштування (23 сторінок), Посібник (7 сторінок), Посібник з швидкого налаштування (37 сторінок)
Друкувати сторінку
■ Getting Started
Carton Components
1
2
3
4
5
1
. Automatic Document Feeder (ADF)
2
. Control Panel
3
. Face-down Output Tray
Support Flap (Support Flap)
4
. Front cover
Drum Unit Assembly
(including Toner
Cartridge)
Carton components may differ from one country to another.
Save all packing materials and the carton.
Austraria & New Zealand users:
The mains plug supplied with this machine is a grounded three pin plug. Make sure that the AC socket will
accept this grounded three pin plug. This machine must be grounded, If in doubt, call a qualified electrician.
Philipine & Thailand users:
The mains plug supplied with this machine is a side grounded two pin plug. Make sure that
the AC socket will accept this side grounded two pin plug. This machine must be grounded,
If in doubt, call a qualified electrician.
■ To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is
properly grounded through the standard electrical wiring. None grounded equipment may cause an
electrical shock hazard, and may cause excessive electrical noise radiation.
■ The interface cable is not a standard accessory. Please purchase the appropriate interface cable for
the interface you intend to use (Parallel, USB or Network).
■ Do NOT connect the interface cable at this time. Connecting the interface cable is done during the
software installation process.
■ USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 metres.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a
USB port on a keyboard or non-powered USB hub.
■ Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 2.0 metres.
Use a shielded interface cable that is IEEE 1284-compliant.
■ Network cable
Use a straight-throgh Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
5
. Paper Tray
6
. Power Switch
7
. Document Cover
8
. ADF Document Output Support Flap
Telephone Line Cord
Adapter
(For Australia only)
Hong Kong, Malaysia & Singapore users:
8
7
6
AC Power Cord
Telephone Line Cord
Quick Setup Guide
CD-ROMs
®
For Windows
®
For Macintosh
User's Guide
1