AEG ProSense 6000 Series Посібник користувача - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 сторінок.
Друкувати сторінку5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
12.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The related
programme indicator comes on.
The indicator of the Start/Pauze button
flashes.
The display shows an indicative programme
duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators come on in the display and the
given information changes accordingly.
In case a selection is not possible, no
indicator comes on and an acoustic
signal sounds.
12.6 Starting a programme with the
delay start
Touch the Start/Pauze button.
The appliance starts the countdown of the
delay start.
When the countdown is completed, the
programme starts.
The PROSENSE adapts starts at the end
of the countdown.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pauze button to pause
the appliance. The related indicator
flashes.
2. Touch the Startuitstel button repeatedly
until the display shows
3. Touch the Start/Pauze button again to
start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pauze button to pause
the appliance. The related indicator
flashes.
2. Touch the Startuitstel button repeatedly
until the display shows the desired delay
time.
3. Touch the Start/Pauze button again to
start the new countdown.
12.7 Starting a programme
Touch the Start/Pauze button to start the
programme.
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator
The drain pump can operate shortly
before the appliance fills water.
12.8 The ProSense load detection
The programme duration in the display is
referred to a medium/high load.
1. The appliance detects the load in the first
30 seconds: the indicator
dots flash, the drum rotates shortly.
2. At the end of the load detection, the
indicator
goes off and the time dots
stop flashing. The programme duration
.
.
and the time
ENGLISH
21