Brother MFC-9320CW Посібник з швидкого налаштування - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother MFC-9320CW. Brother MFC-9320CW 49 сторінок. Vista network connection repair instructions
Також для Brother MFC-9320CW: Технічні характеристики (6 сторінок), Посібник з швидкого налаштування (47 сторінок), Посібник з підключення (6 сторінок)
Друкувати сторінку
For Wireless Network Users
b
Manual configuration from the control panel
If your wireless router/access point does not support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™, write
down the wireless network settings of your wireless access point/router.
IMPORTANT
If you do not know this information (Network Name, WEP key, WPA2-PSK (Pre-Shared Key), LEAP or EAP-
FAST) you cannot continue the wireless setup. You should see the documentation provided with your
access point or wireless router, consult the router manufacturer, or your system administrator.
Network name:(SSID, ESSID)
Communication Mode
Infrastructure
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with
access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK(TKIP), WPA-PSK(TKIP or AES) uses a Pre-
Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters.
If you do not know this information you should see the documentation provided with your access point or wireless router.
This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII: Uses 5 text characters
64-bit Hexadecimal: Uses 10 digits of hexadecimal data
128-bit ASCII: Uses 13 text characters
128-bit Hexadecimal: Uses 26 digits of hexadecimal data
3
This is supported for WPA-PSK only
4
Encryption key, WEP key, Passphrase
For LEAP and EAP-FAST, record the User Name and Password
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
Now go to
c
One push configuration using SecureEasySetup™ ,Wi-Fi Protected Setup or AOSS™
If your wireless router/access point supports automatic wireless (one-push) setup (SecureEasySetup™, Wi-Fi
Protected Setup or AOSS™)
Now go to
Authentication method
Open system
Shared key
1
WPA/WPA2-PSK
LEAP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
Authentication method
WPA2-PSK
Encryption mode
2
WEP
NONE
2
WEP
AES
3
TKIP
CKIP
AES
TKIP
e.g. "Hello" (this is case sensitive)
e.g. "71f2234aba"
e.g. "Wirelesscomms" (this is case sensitive)
e.g. "71f2234ab56cd709e5412aa3ba"
Encryption mode
AES
4
Network key
—
Network key
12345678
page 33
page 35
29