Brother MFC-9320CW Посібник з швидкого налаштування - Сторінка 45

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сервер друку Brother MFC-9320CW. Brother MFC-9320CW 49 сторінок. Vista network connection repair instructions
Також для Brother MFC-9320CW: Технічні характеристики (6 сторінок), Посібник з швидкого налаштування (47 сторінок), Посібник з підключення (6 сторінок)

For Network Users

BRAdmin Light utility (for Mac OS X users)

BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother

products on your network, view the status and configure basic network settings, such as IP address from a

computer running Mac OS X 10.3.9 or greater.

The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already

installed the printer driver, you do not have to install BRAdmin Light again. For more information on BRAdmin

Light, visit us at http://solutions.brother.com/.

Set your IP address, Subnet Mask

and Gateway using BRAdmin Light

Note

• If you have a DHCP/BOOTP/RARP server in

your network, you do not have to do the

following operation. The machine will

automatically obtain its own IP address.

• Make sure that version 1.4.2 or greater of

Java™ client software is installed on your

computer.

• The default password for the machine is

'access'. You can use BRAdmin Light to

change this password.

Double-click Macintosh HD on your desktop.

Choose Library, Printers, Brother and then

Utilities.

Double-click the file BRAdmin Light.jar and

run the software. BRAdmin Light will then

search for new devices automatically.

Double-click the unconfigured device.

Choose STATIC for Boot Method. Enter the

IP Address, Subnet Mask and Gateway, and

then click OK.

The address information will be saved to the

machine.