Brother MFC-J2310 Посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для Сервер друку Brother MFC-J2310. Brother MFC-J2310 22 сторінки. Wi-fi direct guide
Також для Brother MFC-J2310: Посібник з безпеки продукції (25 сторінок), Посібник "Почніть тут (47 сторінок)
Друкувати сторінку
Configuration methods
One-push configuration using WPS (Wi-Fi Protected Setup)
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network.
NOTE
When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.
a
Press
.
b
Press All Settings.
c
Press Network.
d
Press Wi-Fi Direct.
e
Press Group Owner and then press On.
f
Press Push Button.
g
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
h
When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate
your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press
i
If your mobile device connects successfully, the machine displays the message Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 14.
Configuration using the PIN Method of Wi-Fi Direct
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network.
NOTE
When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.
a
Press
.
b
Press All Settings.
c
Press Network.
.
2
2
2
6