Brother 2 Посібник - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для Програмне забезпечення Brother 2. Brother 2 39 сторінок. Hewlett-packard laser printer user guide
Також для Brother 2: Посібник користувача (15 сторінок)

Друкувати сторінку

Attaching the Leader Sheet to the Material

Pull the tip of the material placed on the roll feeder

toward you.

• Check that the surface to be cut is on the bottom side.

a Backing (film)

Remove the protective sheet of the leader sheet.

Attach the material from above by aligning it straight

along the attachment position line (black line) on the

leader sheet. At this time, align the leader sheet and the

left side edge of the material and stick them together.

a Attachment position line

Note

• If the left edge of the material is sticking out form the

leader sheet, or the material is attached diagonally to the

attachment position line, it may not feed well.

Flip over the leader sheet so that the arrow on the leader

sheet points toward the feeding slot.