Brother DCP-375CW Посібник з швидкого налаштування - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Програмне забезпечення Brother DCP-375CW. Brother DCP-375CW 29 сторінок. Inkjet dcp/mfc
Також для Brother DCP-375CW: Посібник з швидкого налаштування (43 сторінок), Посібник з швидкого налаштування (39 сторінок), Перелік деталей для довідки (32 сторінок)

For Wireless Network Users

Confirm your network environment (Infrastructure Mode)

The following instructions will offer two methods for installing your Brother machine in a wireless network

environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to

assign IP addresses. Choose a configuration method and proceed to the page indicated.

If your wireless access point/router does not support SecureEasySetup™, Wi-Fi Protected Setup

or AOSS™, write down the wireless network settings of your wireless access point/router in the

area below.

IMPORTANT

If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot

continue the wireless setup. You should see the documentation provided with your wireless

access point/router, consult the router manufacturer, or your system administrator.

Item

Network Name: (SSID/ESSID)

Password

Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using

more than one WEP KEY enter the KEY used for the first WEP KEY.

Now go to

If your wireless access point/router supports automatic wireless (one-push) setup

(SecureEasySetup™, Wi-Fi Protected Setup or AOSS™), you can find instructions in the Network

User's Guide on the CD-ROM. To set up your machine in any other wireless environment (Ad-hoc

mode) you can find instructions in the Network User's Guide on the CD-ROM.

Record the current wireless network settings

page 16