Brother HL-760 Series Посібник з швидкого налаштування - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Програмне забезпечення Brother HL-760 Series. Brother HL-760 Series 17 сторінок. Quick setup guide - english
Також для Brother HL-760 Series: Посібник з експлуатації (25 сторінок), Посібник з експлуатації (44 сторінок)

Друкувати сторінку

English: HL-YL Quick Setup Guide, Body

Action 4: Connect Your Printer to Your Computer

You must connect the printer to your computer with a suitable interface cable. A bi-directional

IEEE 1284 compliant parallel cable should be used for this connection, unless you are using

the optional serial interface board.

NOTE

The printer can also operate with an RS-232C/RS-422A serial interface by installing the

optional serial interface board. In some countries it might be pre-installed. For more

information, see "CHAPTER 4 OPTIONS" in the User's Guide.

For the location of your computer's parallel (or serial, if you are using the optional interface

board) printer port, refer to the User's Guide of your computer.

Make sure that the printer power switch is

off before connecting or disconnecting the

interface cable.

Also, make sure that the computer is turned

off.

Connect the parallel interface cable (printer

cable) to the parallel interface port of the

printer. (

)

Secure the connection with the wire clips.

(

)

Connect the interface cable to the printer

port of the computer.