Brother MFC 255CW - Color Inkjet - All-in-One Посібник із швидкого старту - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Програмне забезпечення Brother MFC 255CW - Color Inkjet - All-in-One. Brother MFC 255CW - Color Inkjet - All-in-One 43 сторінки. Inkjet dcp/mfc
Також для Brother MFC 255CW - Color Inkjet - All-in-One: Посібник з швидкого налаштування (45 сторінок), Посібник з швидкого налаштування (43 сторінок), Перелік деталей для довідки (32 сторінок)
Друкувати сторінку
For Wireless Network Users
16
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to
assign IP addresses. Choose a configuration method and proceed to the page indicated.
a
If your wireless access point/router does not support SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™, write down the wireless network settings of your wireless access point/router in the
area below.
IMPORTANT
If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot
continue the wireless setup. You should see the documentation provided with your wireless
access point/router, consult the router manufacturer, or your system administrator.
Item
Network Name: (SSID/ESSID)
Password
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using
more than one WEP KEY enter the KEY used for the first WEP KEY.
Now go to
b
If your wireless access point/router supports automatic wireless (one-push) setup
(SecureEasySetup™, Wi-Fi Protected Setup or AOSS™)
Now go to
Record the current wireless network settings
page 28
page 29
27