Fujitsu 9811 ATB Посібник оператора - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник оператора для Принтер Fujitsu 9811 ATB. Fujitsu 9811 ATB 22 сторінки. Printers

Installing the Printer

step: Mounting the bin feeder

Mount the bin feeder on the assembled pedestal

Fix them with four screws after facing

in front and right face. Refer to photo 4 and 5

Use screws with hexagonal head, which

are attached on the pedestal.

step: Mounting F9811 printer

Printer and Secure Bin are set up as below order

1.Change metal plate on the bottom of the printer to enclosed new plate and fixes it with enclosed

screws. Refer to photo 6 and 7

2.Slide the printer into a hook of the bin and fit the rear of the printer with the bin. Photo 8 and 9.

3.Screw the printer and the bin with two wing head screws. Photo 9.

4.Connect a power cable and communication cable to the printer and cramp them on the bin.

Keep enough slack of the cables between the connectors and cramps. Refer to photo 10

Metal plate

Hook

Photo 4

Photo 6

Photo 8

Photo 10

Close the door

New metal plate

Photo 7

Photo 9

fit to rear

Photo 11

Photo 5