Brother MFC-295CN Посібник з швидкого налаштування - Сторінка 29
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Програмне забезпечення Brother MFC-295CN. Brother MFC-295CN 45 сторінок. Inkjet dcp/mfc
Також для Brother MFC-295CN: Технічні характеристики (2 сторінок), Перелік деталей для довідки (32 сторінок), Посібник із швидкого старту (43 сторінок)
For Wireless Network Users
18
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment. Both methods are for infrastructure mode, using a wireless access point/router that uses DHCP to
assign IP addresses. Choose a configuration method and proceed to the page indicated.
a
If your wireless access point/router does not support SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™, write down the wireless network settings of your wireless access point/router in
the area below.
IMPORTANT
If you do not know this information (Network Name (SSID/ESSID), and Password), you cannot
continue the wireless setup. You should see the documentation provided with your wireless
access point/router, consult the router manufacturer, or your system administrator.
Item
Network Name: (SSID/ESSID)
Password
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using
more than one WEP KEY enter the KEY used for the first WEP KEY.
Now go to
b
If your wireless access point/router supports automatic wireless (one-push) setup
(SecureEasySetup™, Wi-Fi Protected Setup or AOSS™)
Now go to
Record the current wireless network settings
page 30
page 31
29