Fujitsu FI-6130 Чистка та обслуговування - Сторінка 8

Переглянути онлайн або завантажити pdf Чистка та обслуговування для Принтер Fujitsu FI-6130. Fujitsu FI-6130 47 сторінок. Color duplex workgroup scanners
Також для Fujitsu FI-6130: Посібник для початківців (20 сторінок), Брошура та технічні характеристики (2 сторінок), Інструкція з експлуатації (10 сторінок), Початок роботи (23 сторінок), Інструкції з очищення (2 сторінок)

Plastic roller

Lightly clean the Plastic roller taking care not to damage the roller surface. Take particular care when cleaning this

roller as black debris on it affects document pick performance. Be careful not to damage the sponges attached around

the middle of the roller.

Clean lightly.

HINT

If the glass is dirty, vertical streaks may apper in the scanned images.

Clean lightly with a dry cloth.

With the movie below, review the procedure to clean the Brake roller, Pick roller, Plastic roller, and ADF glass surfaces:

1) Open the ADF when the indication of the Function Number display is not "P" or "0".

If you open the ADF when the indication of the Function Number display is "P" or "0", the Feed rollers/Eject rollers

will not rotate even you perform the operation of step 2 below.

2) Simultaneously hold down the [Send to] and [Scan] buttons on the Operator Panel.

The Feed rollers/Eject rollers start to rotate slowly.

3) Hold a soft cloth moistened with cleaning fluid against the surface of the rotating Feed rollers so that it lightly

cleans the surface of the rollers. Take particular care when cleaning these rollers as black debris on these rollers

affects pickup performance. As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed

rollers/Eject rollers to rotate one full turn.