Brother MFC-J825DW Посібник з безпеки продукції - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Програмне забезпечення Brother MFC-J825DW. Brother MFC-J825DW 17 сторінок. Quick setup guide - spanish
Також для Brother MFC-J825DW: Посібник (12 сторінок), Посібник (21 сторінок), Посібник з веб-підключення (22 сторінок), Посібник з швидкого налаштування (45 сторінок), Посібник з техніки безпеки (17 сторінок), Посібник з швидкого налаштування (42 сторінок), Посібник з усунення несправностей (6 сторінок), Посібник (іспанською) (21 сторінок), Посібник (іспанською) (16 сторінок), (Англійська) Посібник зі швидкого налаштування (44 сторінок)

Regulation

WARNING

When using your telephone equipment, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and injury to people, including the following:

• DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink

or washing machine, in a wet basement or near a swimming pool.

• Avoid using this product during an electrical storm. There may be a remote risk of electric

shock from lightning.

• DO NOT use this product to report a gas leak in the vicinity of the leak.

(MFC models only)

To reduce the risk of fire, electrical shock and injury to people;

• Use only a No. 26 AWG or larger telecommunication line cord.

This product must be installed near an AC power outlet that is easily accessible. In case of an

emergency, you must unplug the power cord from the AC power outlet to shut off the power

completely.

Standard telephone and FCC notices (MFC models only)

These notices are in effect on models sold and used in the United States only.

When programming emergency numbers or making test calls to emergency numbers:



Remain on the line and briefly explain to the dispatcher the reason for the call before hanging

up.



Perform these activities in the off-peak hours, such as early morning or late evening.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the

ACTA. On the backside of this equipment is a label that contains, among other information, a

product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided

to the telephone company.

You may safely connect this equipment to the telephone line by means of a standard modular jack,

USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network

must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.

A compliant telephone cord and modular plug is provided with this product. It is designed to be

connected to a compatible modular jack that is also compliant. See installation instructions for

details.