Fujitsu N7100E Початок роботи - Сторінка 14

Переглянути онлайн або завантажити pdf Початок роботи для Принтер Fujitsu N7100E. Fujitsu N7100E 24 сторінки.

Set the scanner's IP address.

On the [IP Address] window, set the scanner's IP

address, and press the [Next] button.

ATTENTION

When DHCP is not used, do not use an IP address that

already exists in the network.

If you try to set an IP address that already exists, an error

occurs.

10.

Set the DNS server.

On the [DNS Server] window, set the IP address for

the DNS server, and press the [Next] button.

HINT

If the scanner is not connected to the network, the FQDN

may not be displayed correctly.

11.

Set the Central Admin Server.

On the [Scanner Central Admin Server] window, set

whether to enable the Central Admin Server and the

Central Admin Server settings, and press the [Finish]

button.

12.

Confirm the configured settings.

On the settings confirmation window of the

installation wizard, confirm the configured basic

settings, and press the [OK] button.

The installation wizard finishes and the login

window appears.