Brother PED-BASIC 1.0 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Програмне забезпечення Brother PED-BASIC 1.0. Brother PED-BASIC 1.0 19 сторінок. Users manual - english
Також для Brother PED-BASIC 1.0: Короткий довідник (2 сторінок)

Brother PED-BASIC 1.0 Інструкція з експлуатації

System requirements

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
Before installing the software in your computer, make sure that the computer meets the following require-
ments.
Computer
Operating system
Processor
Memory
Hard disk free space
Monitor
Port
Printer
CD-ROM drive
Power is supplied to this USB card writer box through the USB connection. Connect the USB card
writer box to a USB connector of the computer or to a self-powered USB hub that can supply
enough power to the card writer box. If the card writer box is not connected in this way, it may
not operate correctly.
This product may not operate correctly with some computers and USB expansion cards.

Installation

G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
This section describes how to install the driver and application software.
Be sure to perform the installation according to the following instructions. If the installation is inter-
rupted or not performed according to the instructions, the software will not be installed correctly.
The following installation procedure includes descriptions and dialog boxes for Windows 98. The
procedure and dialog boxes for other operating systems may be slightly different.
Turn on the computer and start Windows.
1
Quit all other applications.
Plug the USB connector into the USB
2
port on the computer.
Make sure that the connector is fully
inserted.
2

Installing the Software

IBM PC or compatible (DOS/V) computer originally equipped with a USB port
Windows 98, ME, XP or 2000
Pentium 133 MHz or higher
Minimum 32 MB (64 MB or more is recommended)
Minimum 10 MB
SVGA (800 × 600), 16 bit color or higher
USB Ver. 1.1
Printer supported by your system (for printing pattern information)
Required for installation