Brother Quattro 2 6700D Посібник з експлуатації - Сторінка 28
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Brother Quattro 2 6700D. Brother Quattro 2 6700D 50 сторінок. Kit para crear efectos decorativos con bobinas
Також для Brother Quattro 2 6700D: Посібник з експлуатації (16 сторінок), Інструкція з експлуатації (40 сторінок), (Англійська) Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
28
4
When a color is selected, the palette is automatically
closed.
The color changes to the color selected with
In addition,
area can be filled with the selected color.
*
After the color of an area is selected, lines of the drawing
other than those drawn freehand to close openings cannot
be added, edited or their color changed. To change a line,
continue pressing
condition before the first color of an area was selected.
5
Touch the area to be filled with the color. The area is
filled with the color.
Notes
•
Color can only fill an outlined area. If the desired area is not filled
with color or if an area that you did not want to fill with color is
filled, correct the lines. (Refer to "Color Is Not Correctly Added"
on page 29.) In addition, a very small area (thin area) cannot be
filled with color. In this case, continue pressing
drawing returns to the condition before the first color of an area
was selected, and then correct the lines to make the area larger.
6
Fill the other areas with color as described in steps 1
through 5.
If you fill the wrong area or if you wish to change the
color, repeat steps 1 through 5 to change the color.
Notes
•
The order in which colors are added is the same as the sewing
order.
changes to
, indicating that an
until the drawing returns to the
.
until the