Fujitsu LifeBook T4210 Посібник з біосу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з біосу для Планшет Fujitsu LifeBook T4210. Fujitsu LifeBook T4210 33 сторінки. Lifebook t series
Друкувати сторінку
L i f e B o o k T S e r i e s T a b l e t P C
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads
and sectors may also be displayed.
Main
Type:
Total Sectors:
Maximum Capacity:
F1
Help
ESC
Exit
Menu Field
Options
■
Type:
Auto
■
None
LBA Format
Total Sectors:
---
Maximum Capacity:
---
■
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk
format CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take
drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or
DVD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is
always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your
application software will use the new designations.
■
Be aware of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly
overwrite files.
PhoenixBIOS Setup Utility
Drive0 [FUJITSU MHV2040BH]
[Auto]
LBA Format
78140160
40008MB SATA1
Select Item
-/Space
Change Values
Select Menu
Enter
Select
Figure 2. Drive0 Submenu
Default
Description
[Auto]
Selects the hard drive device type. Select Auto to have the type automatically identified
by the BIOS at POST. If None is selected, all of the following Setup items do not appear.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
6
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit