Brother DSmobile 820W Посібник з швидкого налаштування

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Сканер Brother DSmobile 820W. Brother DSmobile 820W 6 сторінок.
Також для Brother DSmobile 820W: Посібник з швидкого налаштування (6 сторінок)

Brother DSmobile 820W Посібник з швидкого налаштування
Quick Setup Guide
DSmobile 820W
Start Here
Thank you for choosing Brother. Your support is important to us and we value your business. Before using your machine, read this Quick Setup
Guide for the correct setup and installation.
1
Unpack the machine and check the components
DSmobile 820W
Micro USB Cable
Warranty Card
* If your computer does not have a DVD-ROM drive, the supplied DVD-ROM does not contain drivers for your operating system, or you want
to download manuals and utilities, visit your model page at http://solutions.brother.com/
a
Remove the packing material.
b
Make sure you have all the components.
2
Before you use the
scanner
a
Install the supplied Li-ion Battery into the end of your
scanner, as shown in the illustration.
b
Make sure that your computer is ON.
c
Connect the supplied Micro USB Cable to the micro
USB port
on the rear of your scanner. Connect
the cable to your computer. The battery starts charging
automatically.
The Power button
lights up green while the battery is
charging, and goes off when charging is complete.
Li-ion Battery
SD Memory Card
Cleaning Cloth
NOTE
d
DSmobile 820W
Carrier Sheet
Quick Setup Guide
Soft Carrying Bag
When charging the battery, press and hold the Power
button
to turn off your scanner. You can charge the
battery with the power either on or off, but charging takes more
time when powered on.
When charging the battery with the power on, slide the Wi-Fi
switch
to OFF.
When the scanner is turned on, the battery level is displayed
on the LCD panel.
Battery icon
Power level
Full
Half full
Low
If you do not use the scanner for a long period, charge the
battery fully at least once every six months to prolong battery
capacity and store the battery in a cool, dry place at a
consistent temperature.
If you do not use the scanner for a long period, remove the
battery from the scanner.
Gently insert the supplied
SD Memory Card into the
memory card slot
on
the rear of your scanner.
Calibration Sheet
DVD-ROM
®
UK Version 0
1