Fujitsu T4310 - LifeBook Tablet PC Початок роботи - Сторінка 3
Переглянути онлайн або завантажити pdf Початок роботи для Планшет Fujitsu T4310 - LifeBook Tablet PC. Fujitsu T4310 - LifeBook Tablet PC 13 сторінок. Lifebook t series
Також для Fujitsu T4310 - LifeBook Tablet PC: Технічні характеристики (2 сторінок), Посібник з біосу (27 сторінок)
Друкувати сторінку
Initial Start Up
Rotating
Display
DC Power Jack
AC Adapter
LAN Connector
Power/Suspend/
Resume Button
WLAN/Bluetooth/Switch
Lid
Top Latch
Display Side
Bottom
Latch
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that the
air vents are not blocked.
• Lift the display.
• Adjust the display until it is at a comfortable viewing angle.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular to
the keyboard.
• Rotate the display 180 degrees (either direction).
• Carefully fold the display down onto the keyboard.
• Push the latch down toward the display.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the wireless switch to "On" to turn on the wireless device,
or connect an Ethernet cable (not supplied) to the LAN jack on
your notebook and to a wall jack or to Ethernet router.
5. Turn on Power
• Slide the Power/Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once
successfully completed, the operating system will begin
the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
6. Register
• After the operating system has initialized, the Windows Welcome
screen will appear. Accept the Microsoft
Agreement and the Fujitsu End User License Agreement
to proceed.
• Follow the on-screen directions as prompted. Accepting the
automatic update feature is recommended.
• If connected, you will be able to automatically access the Internet.
If you are not connected and plan to register at a later time,
click the Skip button.
• Once connected to the Internet, select Yes to continue registration,
complete requested information, and click Next to complete
registration.
• Register your notebook with Fujitsu by going to our website at:
us.fujitsu.com/computers. Ensure you are connected to
the Internet.
7. Activate Additional Utilities & Drivers
• Check to be sure the WLAN switch is on. The pen and touch
functions will not be calibrated until ClickMe! is activated.
Ensure that the AC adapter is connected and supplying
power to your notebook before activating ClickMe! It will
take 25 to 30 minutes for ClickMe! to install and configure
your drivers and utilities.
• In addition to an icon on the desktop, a dialog box will automatically
open that prompts you to run ClickMe!. If you choose
not run ClickMe! at this time, the ClickMe! icon will
appear on your desktop. When you click the ClickMe!
icon, your system will automatically build the icon
tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
Windows
Licensing
®
®
(For
Additional
Utilities)
"Click me!"
3