Initial Start Up
Rotating
Display
Top Latch
DC Power Jack
modem Jack
(Available
on select
models)
WLAN/Bluetooth/
WWAN Switch
Lid
Display Side
Bottom
Latch
AC Adapter
LAN Jack
Power/Suspend/
Resume Switch
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that the
air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular
to the keyboard.
• Rotate the display 180 degrees (either direction).
• Carefully fold the display down onto the keyboard.
• Push the latch down toward the display.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the wireless switch to "On" to turn on the wireless device.
• Connect the phone cord (not supplied) to the modem jack (available
on some models) or an Ethernet cable (not supplied) to the LAN jack
on your Tablet PC and to a wall jack or to Ethernet router.
5. Turn on Power
• Slide the Power/Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once successfully completed,
the operating system will begin the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
6. Register
For Genuine Windows Vista
• Accept the Microsoft
®
Windows
End User License Agreement to proceed. Select your User ID and
Password during the "Welcome Screen." Keep a record of your
User ID and password stored in a secure place. THE SCREEN WILL
GO DARK FOR APPROXIMATELY TWO MINUTES. Do not attempt to
turn power on or off during this stage.
• Register your LifeBook with Fujitsu Service and Support via our web-
site (us.fujitsu.com/computers). This helps us to better serve you.
For Microsoft
Windows
7
®
®
• After the operating system has initialized, the Windows Welcome screen
will appear. Accept the Microsoft
and the Fujitsu End User License Agreement to proceed. Follow the
on-screen directions as prompted. Accepting the automatic update
feature is recommended.
• If connected, you will be able to automatically access the Internet. If you
are not connected and plan to register at a later time, click the Skip button.
• Once connected to the Internet, select Yes to continue registration,
complete requested information, and click Next to complete registration.
• Register your notebook with Fujitsu by going to our website at:
us.fujitsu.com/computers. Ensure you are connected to the Internet.
For Genuine Microsoft
Windows
®
• After the operating system has initialized, accept the Microsoft
Licensing Agreement and the Fujitsu End User License Agreement to
proceed. Then enter the information as prompted to personalize your
notebook and configure your modem to dial.
7. Activate Additional Utilities & Drivers
The Pen and touch functions will not be calibrated until ClickMe!
is activated. Ensure that the AC adapter is connected and
supplying power to your notebook before activating ClickMe!
It will take 25 to 30 minutes for ClickMe! to install and configure
your drivers and utilities.
• Check to be sure the WLAN switch is on.
:
®
®
Licensing Agreement and the Fujitsu
®
Windows
®
Licensing Agreement
XP Tablet PC:
®
®
Windows
"Click me!"
®
(For
Additional
Utilities)
3