AC Schnitzer G01 M-Technik Інструкція з монтажу Інструкція з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з монтажу Інструкція з монтажу для Автомобільні аксесуари AC Schnitzer G01 M-Technik. AC Schnitzer G01 M-Technik 20 сторінок. Front spoiler elements
Друкувати сторінку
G e n e r a l N o t e s !
AC Schnitzer Front Spoiler Elements X3 (G01) – X4 (G02) M-Technik
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles who have the correspond-
ing specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
As manufacturer, we are obliged to point out that any changes you make to a vehicle licensed for use on public roads
require approval by a test centre and registration in the vehicle documents.
As the legal regulations may vary according to location, please contact the competent authorities for information.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Components and surfaces to be glued together must first be thoroughly cleaned with cleaner.
The adhesive drying time is 24 hours. The vehicle can be washed in a car wash after approx. 48 hours.
AC Schnitzer Front Spoiler Elements only be fitted to..........
... Vehicles with M-Technik body kit
Painting
Before painting, all AC Schnitzer bodystyling components must be checked for fit on the vehicle (e.g. contact sur-
faces/contours).
Any retouching work (e.g. sanding of contact surfaces/contours) must be carried out before painting !
Painting Instructions and corresponding notes and recommendations are attached at the end of these Fitting Instruc-
tions (see Contents).
The instructions of the paint manufacturer must be observed !!
Fitting Time (1 unit = 5 minutes)
The fitting time is 12 units, which may vary depending on vehicle condition and equipment level.
Painting Time (1 unit = 5 minutes)
The painting time is 18 units, which may vary depending on component composition.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 301 310 / Issue: 31.08.2018 / TSch / REV01
12
Fax -135