Fujitsu D3162-B Технічна примітка - Сторінка 20

Переглянути онлайн або завантажити pdf Технічна примітка для Материнська плата Fujitsu D3162-B. Fujitsu D3162-B 45 сторінок. Extended lifecycle mainboard

Друкувати сторінку

Interfaces & Connectors

3.12 Chassis Intrusion

Note:

The intrusion supervision feature needs to be enabled in BIOS Setup first (Menu „Security"  „Cabinet

Monitoring").

This BIOS option is only available if pin 3 („Intrusion Switch Present") is connected to GND!

The intrusion status can be easily monitored by using the BMCAPI (Windows):

ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D3162-B/IndustrialTools_D3162-B/

Note:

Chassis intrusion is active even if the system is switched off (S5 state) or

disconnected from mains power.

The intrusion event is monitored by the chipset (PCH) and stored in the BIOS

Eventlog during the next Boot.

A timestamp (Boot date/time) will be added then.

Note: This timestamp does not represent date/time of the intrusion event!

If a Supervisor Password is enabled in BIOS Setup, the system will stop

during BIOS POST if an intrusion event has been detected. In order to

continue, the Supervisor Password must be entered to confirm the intrusion

event.

TechNotes

D3162-B V1.0

Page 20 of 45