Fujitsu F2MC-8FX MB95390 Series Посібник з налаштування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з налаштування для Материнська плата Fujitsu F2MC-8FX MB95390 Series. Fujitsu F2MC-8FX MB95390 Series 18 сторінок.
Друкувати сторінку
EV Board MB2146-441-E Setup Guide
PREFACE
The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
The information, such as descriptions of function and application circuit examples, in this document are
presented solely for the purpose of reference to show examples of operations and uses of FUJITSU
MICROELECTRONICS semiconductor device; FUJITSU MICROELECTRONICS does not warrant proper
operation of the device with respect to use based on such information. When you develop equipment
incorporating the device based on such information, you must assume any responsibility arising out of
such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages
whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be
construed as license of the use or exercise of any intellectual property right, such as patent right or
copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU
MICROELECTRONICS warrant non-infringement of any third-party s intellectual property right or other
right by using such information. FUJITSU MICROELECTRONICS assumes no liability for any
infringement of the intellectual property rights or other rights of third parties which would result from the
use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for
general use, including without limitation, ordinary industrial use, general office use, personal use, and
household use, but are not designed, developed and manufactured as contemplated (1) for use
accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious
effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss
(i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport
control, medical life support system, missile launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU
MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages
arising in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage
or loss from such failures by incorporating safety design measures into your facility and equipment such
as redundancy, fire protection, and prevention of over-current levels and other abnormal operating
conditions.
Exportation/release of any products described in this document may require necessary procedures in
accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or
US export control laws.
The company names and brand names herein are the trademarks or registered trademarks of their
respective owners.
© 2010 FUJITSU MICROELECTRONICS LIMITED
Page 3