Fujitsu MB2146-251 Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Материнська плата Fujitsu MB2146-251. Fujitsu MB2146-251 16 сторінок. F2mc-8fx family 0.65 mm pitch header board

Друкувати сторінку

PREFACE

Thank you for purchasing the QFP-100P (0.65 mm pitch) *

MB2146-251) for the F

MB2146-251 is a header board used to connect the MCU board (Model number : MB2146-301,

MB2146-303) which mounted F

This manual explains the handling of the MB2146-251 for the F

MB2146-251, be sure to read this manual.

Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-

duced MCUs and evaluation MCUs which correspond on MB2146-251.

*1 : The lead pitch of package (FPT-100P-M06) is 0.65 mm and the body size is 14 mm × 20 mm.

*2 : F

■ Caution of the products described in this document

The following precautions apply to the product described in this manual.

CAUTION

Cuts

Damage

MC *

-8FX family.

MC is the abbreviation used for FUJITSU Flexible Microcontroller.

The wrong use of a device will give an injury and may cause malfunction on cus-

tomers system.

This product has parts with sharp points that are exposed.

Do not touch edge of the product with your bare hands.

When connect the header board to the user system, correctly position the index

mark (▲) on the NQPACK mounted on the user system with the 1 pin direction(1)

on the header board, otherwise the MCU board and user system might be dam-

aged.

When mounting a mass production MCU, correctly position pin 1, otherwise the

mass production MCU and user system might be damaged.

MC-8FX family evaluation MCU to a user system.

header board (Model number :

MC-8FX family. Before using