Fujitsu SK-96320-80PMC Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата Fujitsu SK-96320-80PMC. Fujitsu SK-96320-80PMC 34 сторінки.
Також для Fujitsu SK-96320-80PMC: Посібник користувача (34 сторінок), Посібник користувача (34 сторінок)
Друкувати сторінку
3 Jumpers and Switches
This chapter describes all jumpers and switches that can be modified on the evaluation
board. The default setting (MB96320 Series) is shown with a grey shaded area.
3.1 Operating Mode (S2)
The DIP-switch S2 is used to set the operating mode of the KC. Ensure that the mode pin
settings correspond to the operation-mode of the application. For more detailed information
please check the Hardware-Manual of the microcontroller.
FMEMCU-UG-960010-12
Downloaded from
Elcodis.com
electronic components distributor
SK-96320-80PMC User Guide
Chapter 3 Jumpers and Switches
DIP switch
Setting
ON (closed)
S2/1 (MD0)
OFF (open)
ON (closed)
S2/2 (MD1)
OFF (open)
ON (closed)
S2/3 (MD2)
OFF (open)
S2/4
Dip-Switch S2
(run mode)
Logical value
1 (high)
0 (low)
1 (high)
0 (low)
1 (high)
0 (low)
not connected
MD0 MD1 MD2 nc
ON
OFF
1
2
3
4
- 12 -
© Fujitsu Microelectronics Europe GmbH