Fujitsu SK-96320-80PMC Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата Fujitsu SK-96320-80PMC. Fujitsu SK-96320-80PMC 34 сторінки.
Також для Fujitsu SK-96320-80PMC: Посібник користувача (34 сторінок), Посібник користувача (34 сторінок)
Друкувати сторінку
1 Overview
1.1 Abstract
The SK-96320-80PMC is a multifunctional evaluation board for the Fujitsu 16-bit Flash
microcontroller series MB96320.
It can be used stand-alone for software development and testing or as a simple target board
to work with the emulator system.
The board allows the designer immediately to start software development before his own
final target system is available.
1.2 Features
< Supports Fujitsu's MB96320 Series in FPT-80P-M21 package or the MB2198 Emulator
System with the Probe Cable MB2198-505
< 9-12V unregulated external DC power supply
< 5V and 3.3V onboard voltage regulators
< Power-LEDs
< Onboard voltage supervisor monitor
< In-Circuit serial Flash programming
< All resources available for evaluation
< All MCU pins routed to edge connectors
< 4 MHz main crystal
< 32 kHz crystal for sub clock operation
< Two RS232, two LIN and two CAN interface are usable simultaneously
< 3V capable CAN, LIN and RS232 transceivers
< 8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs
< Reset button, Reset LED
< 5 User buttons
96-pin VG connector featuring most MCU signals (DIN 41612)
<
FMEMCU-UG-960010-12
Downloaded from
Elcodis.com
electronic components distributor
SK-96320-80PMC User Guide
This board must only be used for test applications
in an evaluation laboratory environment.
Chapter 1 Overview
- 6 -
© Fujitsu Microelectronics Europe GmbH