Indesit BTW A51052 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина Indesit BTW A51052. Indesit BTW A51052 26 сторінок.

Друкувати сторінку

Health & Safety guide

SAFETY INSTRUCTIONS

Before using the appliance, read these safety

instructions . Keep them nearby for future reference .

These instructions and the appliance itself provide

important safety warnings, to be observed at all

times . The manufacturer declines any liability for

failure to observe these safety instructions, for

inappropriate use of the appliance or incorrect

setting of controls .

Very young children (0-3 years) should be kept

away from the appliance . Young children (3-8 years)

should be kept away from the appliance unless

continuously supervised . Children from 8 years old

and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge can use this appliance only if they

are supervised or have been given instructions on

safe use and understand the hazards involved .

Children must not play with the appliance . Cleaning

and user maintenance must not be carried out by

children without supervision .

Never open the door forcibly or use it as a step .

PERMITTED USE

CAUTION: The appliance is not intended to be

operated by means of an external switching device,

such as a timer, or separate remote controlled system .

This appliance is intended to be used in household

and similar applications such as: staff kitchen areas in

shops, offices and other working environments; farm

houses; by clients in hotels, motels, bed & breakfast

and other residential environments .

Do not load the machine above the maximum

capacity (kg of dry cloth) indicated in the programme

table .

This appliance is not for professional use . Do not

use the appliance outdoors .

Do not use any solvents (e . g . turpentine, benzene),

detergents containing solvents, scouring powder,

glass or general purpose cleaners, or flammable

fluids; do not machine wash fabrics that have been

treated with solvents or flammable liquids .

INSTALLATION

The appliance must be handled and installed by

two or more persons - risk of injury . Use protective

gloves to unpack and install - risk of cuts .

Move the appliance without lifting it by the

worktop or top lid .

Installation, including water supply (if any) and

electrical connections and repairs must be carried

out by a qualified technician . Do not repair or replace

any part of the appliance unless specifically stated in

the user manual . Keep children away from the

installation site . After unpacking the appliance,

IMPORTANT TO BE READ AND OBSERVED

make sure that it has not been damaged during

transport . In the event of problems, contact the

dealer or your nearest After-sales service . Once

installed, packaging waste (plastic, styrofoam parts

etc . ) must be stored out of reach of children - risk of

suffocation . The appliance must be disconnected

from the power supply before any installation

operation - risk of electric shock . During installation,

make sure the appliance does not damage the

power cable - risk of fire or electric shock . Only

activate the appliance when the installation has

been completed .

Do not install your appliance where it may be

exposed to extreme conditions, such as: poor

ventilation, temperatures below 5 °C or above 35 °C .

When installing the appliance make sure that the

four feet are stable and resting on the floor, adjusting

them as required, and check that the appliance is

perfectly to level using a spirit level .

If the appliance is being installed on wood or

"floating" floors (certain parquet and laminate

materials), secure a 60 x 60 x 3 cm (at least) sheet of

plywood to the floor then place the appliance on

top of this .

Connect the water inlet hose(s) to the water

supply in accordance with the regulations of your

local water company .

For cold fill only models: do not connect to the

hot water supply .

For models with hot fill: the hot water inlet

temperature must not exceed 60 °C .

The washing machine is fitted with transport

screws and a transport bracket to prevent damage

during transport . Before using the washing

machine you must remove the transport

bracket (see "Installation guide") . After the removal,

cover the openings with the 2 enclosed caps .

Remove the bottom protection by tilting and

turning the washing machine on one rear bottom

corner . Make sure that the plastic part of the bottom

protection (if available on the model) remains in the

packing and not in the machine bottom . This is

important, as otherwise the plastic part could

damage the washing machine during operation .

After installation of the device, wait a few hours

before starting it so that it acclimates to the

environmental conditions of the room .

Make sure that the ventilation openings in the

base of your washing machine (if available on your

model) are not obstructed by a carpet or other

material .