Indesit 1230 Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Холодильник Indesit 1230. Indesit 1230 33 сторінки.

Друкувати сторінку

Installation

To ensure that the appliance operates properly and to

reduce energy consumption, it is important that the

appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provide the

appropriate amount of air re-circulation. It is also important

that the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

For proper ventilation of the appliance, you must leave:

- a space of at least 10 cm between the top part and any

cabinets above it;

- a space of at least 5 cm between the sides of the appliance

and any adjacent cabinets/walls.

There are two buffers at the back to ensure adequate spac-

ing from the wall; these are not packaging parts and must

be fitted and used (see illustration).

Away from Heat

Avoid positioning the appliance in a place where it is directly

exposed to sunlight or near an oven, cook top or the like.

Level

The appliance must be level. If the floor is not level, the

adjustable feet located in front can be used to level the ap-

pliance.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure

that the voltage indicated on the rating plate, located at the

bottom left near the vegetable crisper, corresponds to the

mains voltage in your home and that the socket is fitted with

a standard earthing wire in accordance with safety stand-

ards for 46/90 systems. If the socket is not fitted with an

earthing wire, the manufacturer will not be held liability for

any damages and or injuries arising out of the use of the

appliance. Do not use multiple sockets or adapters.

Insufficient power?

The electrical socket must be able to handle the maximum

power load of the appliance, which is indicated on the rating

plate located at the bottom left next to the vegetable crisper.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti-

cal upright position and wait at least 3 hours before inserting

the plug into the socket in order to ensure that it functions

properly.