Indesit BIAA 12P UK Інструкція з експлуатації Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Холодильник Indesit BIAA 12P UK. Indesit BIAA 12P UK 12 сторінок. Refrigerator/freezer combination
Друкувати сторінку
Accessories
GB
*
: with or without grill.
SHELVES
Due to the special guides the shelves are removable and the
height is adjustable (see diagram), allowing easy storage of large
containers and food. Height can be adjusted without complete
removal of the shelf.
*
TEMPERATURE
Indicator light: to identify the coldest area in
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word "OK" does not appear it means that the temperature
is too high: adjust the REFRIGERATOR OPERATION knob to a
higher (colder) position and wait approximately 10 hours until
the temperature has stabilised.
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added
or if the refrigerator door has been opened frequently, it is
normal for the indicator not to show OK. Wait at least 10 hours
before adjusting the REFRIGERATOR OPERATION knob to a
higher setting.
Operation and maintenance of the water
dispenser.
When first used, or after prolonged periods of inactivity, wash the
tank with water. The water dispenser supplies cold water without
having to open the refrigerator door each time.
This also allows for reducing the product's energy consumption.
To fill the tank, lift the flap or remove the cover (see picture) then
pour in the water with a carafe or other suitable container. Avoid
filling the tank completely.
1
2
Always exclusively use drinkable natural mineral water: any
1
other liquid may hamper the device's correct operation.
To withdraw water with the refrigerator door closed, press the
dispenser actuator with a suitable container (glass, carafe, etc.).
2
Release the actuator once the desired quantity has been dispensed.
The water tank should be cleaned regularly under running water; do
not use detergents. To clean the tank, remove the tank cover and
upper ledges; subsequently, remove the tank by pulling it outwards
while pressing the appropriate button (see picture).
The tank must be replaced back into its housing as soon as
possible so as to avoid excessive heating of the refrigerator.
*
Varies by number and/or position, available only on certain
models.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
6
2
6
7
5
4
6
7
5
4
6
7
5
1
4
For more thorough cleaning, it is advisable to unscrew the valve
from the tank (see picture) and clean it under running water.
! Be careful not to pull the transparent mobile element of the valve.
Once cleaning operations have been completed, screw the
valve back on while ensuring that the internal seal adheres to the
9
end part of the tank bushing; subsequently, put the tank-valve
2
assembly back into the appropriate cylindrical housing of the
door, while making sure that the upper hook on the rear wall of
the tank is properly inserted in the appropriate compartment on
the inner wall of the door. Put the previously removed ledges and
8
tank cover back in place.
! Make sure that the tank has been properly inserted in the
door (see picture).
4
3
6
5
! The presence of water drops on the tank walls is a normal
4
3
occurrence during the product's operation.
! Dry any drops present on the outer walls of the product.
! To empty completely the Water Tank, please disassembly
it as shown on the picture, spill the water, clean with a soft
textile and assembly in the product.
6
! If the water drops remain on the external door surface after
use, clean it with a soft cleaning textile.
5
4
3
6
5
7
5
1
4
9
8
8
6
4
3