Indesit D2I HL326 Щоденний довідник - Сторінка 4

Переглянути онлайн або завантажити pdf Щоденний довідник для Посудомийна машина Indesit D2I HL326. Indesit D2I HL326 8 сторінок.

Друкувати сторінку

LOADING THE RACKS

UPPER RACK

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper basket can be adjusted: high position to

place bulky crockery in the lower basket and low position to make the

most of the tip-up compartments by creating more space upwards.

The upper rack is equipped with a Upper

Rack height adjuster (see figure), without

pressing the levers, lift it up by simply holding

the rack sides, as soon as the rack is stable

in its upper position. To restore to the lower

position, press the levers (A) at the sides of

the rack and move the basket downwards.

We strongly recommend that you do not

adjust the height of the rack when it is

loaded.

NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be fold or unfold to

optimize the arrangement of crockery inside

the rack.

Wine glasses can be placed safely in the folda-

ble flaps by inserting the stem of each glass

into the corresponding slots.

Depending on the model:

- to unfold the flaps there is needed to slide it

up and rotate or release it from the snaps and

pull it down.

- to fold the flaps there is needed to rotate it

and slide flaps down or pull it up and attach

flaps to the snaps.

Load delicate and light dishes:

glasses, cups, saucers, low

salad bowls.

LOWER RACK

(loading example for the lower rack)

CUTLERY BASKET

The basket is equipped with top grilles for improved cutlery arrange-

ment. The cutlery basket should be positioned only at the front of the

lower rack.

Knives and other utensils with sharp edges must be placed in the

cutlery basket with the points facing downwards or they must be

positioned horizontally in the tip-up compartments on the upper

rack.

For pots, lids, plates, salad

bowls, cutlery etc... Large pla-

tes and lids should ideally be

placed at the sides to avoid

interferences with the spray

arm.