Indesit DFC2C24UK Щоденний довідник - Сторінка 4
Переглянути онлайн або завантажити pdf Щоденний довідник для Посудомийна машина Indesit DFC2C24UK. Indesit DFC2C24UK 8 сторінок.
Друкувати сторінку
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
HALF LOAD
EXTRA LIGHT
/
The button has two functions: HALF LOAD and EXTRA LIGHT.
Select the wash cycle and press the HALF LOAD/EXTRA LIGHT
button; the indicator light will go on.
Press the HALF LOAD/EXTRA LIGHT button again to deselect
this option.
HALF LOAD
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
The amount of detergent can be halved.
EXTRA LIGHT
Compatible with the wash cycle EXTRA only.
This option makes EXTRA suitable to large delicate crockery
and items. This option includes no drying phase.
Make sure the crockery and items are dishwasher-safe.
DELAY
It is possible to delay the start time of the program by 2, 4 or
8 hours:
1. After selecting the desired program and any other options,
press the DELAY button. The indicator light will go on.
2. Select the desired delay time by pressing the DELAY button
repeatedly. The 2 hours, 4 hours and 8 hours indicator lights
will go on in succession. If the DELAY button is pressed again,
the option is deselected and the indicator light goes off.
3. After the selection process, the countdown will begin if the
START/PAUSE button is pressed. The selected delay-period
indicator light is on and the Start/Pause button lights up
(fixed light).
4. Once this time has elapsed, the DELAY indicator light goes
off and the program begins.
The DELAY function cannot be set once a program has
started.
PUSH&GO
Push&GO button is an easily distinguishable button that allows
you direct access to the Push&GO program, a wash and dry cycle
that ensures great cleaning performance in a short time. You
don't have to worry which program to choose, Push&GO cycle
will do the work for you.
To select Push&GO program, switch on appliance, press only
Push&GO button for 3 seconds.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function
can be used.
A long press of START/PAUSE button, will activate the DRAIN
OUT function. The active program will be stopped and the water
in the dishwasher will be drained out.
4
EXTRA
EXTRA makes it possible to carry out a heavy-duty wash cycle
of large crockery up to a max height of 53cm: baking pans,
oven grids, dripping pans, hob grids, large saucepans, serving
dishes, pizza dishes, stainless-steel hood filters.
Remove the upper rack to load bulky crockery.
Release the two locks (right and left)
and pull out the rack.
When the upper rack is fitted, the
locks must be always closed.
In order for the water to reach the
crockery everywhere, arrange it as
shown in the Figure.
The cycle can also be used on large
delicate crockery using the option
EXTRA LIGHT (see OPTIONS AND
FUNCTIONS) .
Do not start the dishwasher without the upper rack using
wash cycles other than EXTRA.
To carry out the wash cycle Extra and Extra with the
EXTRA LIGHT option pour the detergent DIRECTLY INTO
THE TUB and not into the dispenser.
AUTO DOOR
Auto Door is a convection drying system which automatically
opens the door during/after drying phase to ensure exceptio-
nal drying performance every day. Door opens at the tempe-
rature that is safe to your kitchen furniture.
As additional steam protection, special designed protection
foil is added together with the dishwasher (depending on the
model type - can be the need to buy it). To see how to mount
protection foil please refer to (INSTALLATION GUIDE).
Auto Door functionality could be disabled by the user as follows:
• To DISABLE: Switch On, then switch Off the machine. Keep
the P button pressed for 5 sec., at the end of 5 sec the
dishwasher plays a short beep. Press the ON/OFF button,
the dishwasher plays the long beep.
• To ENABLE: Switch On, then switch Off the machine. Keep
the P button pressed for 5 sec., at the end of 5 sec the
dishwasher plays a short beep. Press the ON/OFF button,
the dishwasher plays the melody.