Indesit ID67G0MCB/UK Короткий посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Короткий посібник для Кухонні плити Indesit ID67G0MCB/UK. Indesit ID67G0MCB/UK 25 сторінок.
Також для Indesit ID67G0MCB/UK: Посібник (25 сторінок)

Друкувати сторінку

CLEANING AND MAINTENANCE

TURN OFF THE MAIN SWITCH AND ENSURE THE COOKER IS COLD BEFORE CLEANING.

BEFORE SWITCHING ON AGAIN, ENSURE THAT ALL CONTROLS ARE IN THE OFF POSITION.

Do not use steam cleaning

equipment.

Use protective gloves during all

operations.

Disconnect the appliance from the power supply

CLEANING THE HOB SURFACE

All the enamelled and glass parts should be cleaned with

warm water and neutral solution.

Stainless steel surfaces may be stained by calcareous

water or aggressive detergents if left in contact for too long.

Any

od spills

(water, sauce, coffee, etc.) should be wiped

away beffore they dry.

Clean with warm water and neutral detergent, and then dry

a soft cloth or chamois. Remove baked-on dirt with specific

with

for

stainless steel surfaces.

cleaners

NOTE: clean stainless steel only with soft cloth or sponge.

Do not use abrasive or corrosive products, chlorine-based

or pan scourers.

cleaners

Do not use steam cleaning appliances.

Do not use flammable products.

Do not leave acid or alkaline substances, such as vinegar,

mustard, salt, sugar or lemon juice on the hob.

CLEANING THE HOB PARTS

Clean glass and enamelled parts only with soft cloth or sponge.

Grids, burner caps and burners can be removed to be cleaned.

Clean them by hand with warm water and non-abrasive

detergent removing any food residues and checking that

openings is clogged.

of the burner

none

Rinse and dry.

Refit burners and burner caps correctly in the respective

housings.

When replacing the grids, make sure that the panstand area is

aligned

with the burner.

Models equipped with electrical ignition plugs and safety

device

require thorough cleaning of the plug end in order to

ensure correct operation. Check these items frequently, and if

necessary, clean them

with a damp cloth. Any baked-on food

should be removed with a

NOTE: to avoid damaging the electric ignition device,

do not use it when the burners are not in their housing.

CLEANING THE OVEN SURFACE

EXTERIOR SURFACES

• Clean the surfaces with a damp microfibre cloth.

If they are very dirty, add a few drops of pH-neutral

detergent. Dry them with a dry cloth.

• Do not use corrosive or abrasive detergents. If any of

these products inadvertently comes into contact with

the surfaces of the appliance, clean immediately with

a damp microfibre cloth.

INTERIOR SURFACES

• After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove any

deposits or stains caused by food residues To dry any

condensation that has formed as a result of cooking

foods with a high water content, let the oven to cool

completely and then wipe it with a cloth or sponge.

Carry out the required

operations when the oven is cold.

Disconnect the appliance from

the power supply.

toothpick or needle.

Do not use wire wool, abrasive

scourers or abrasive/corrosive

cleaning agents, as these could

damage the surfaces of the

appliance.

• Clean the glass in the door with a suitable liquid

detergent.

ACCESSORIES

Soak the accessories in a washing-up liquid solution

after use, handling them with oven gloves if they

are still hot. Food residues can be removed using a

washing-up brush or a sponge.

REPLACING THE LIGHT

1. Disconnect the oven from the power supply.

2. Unscrew the cover from the light, replace the bulb

and screw the cover back on the light.

Reconnect the oven to the power supply.

Note: Use 40 W/230 V type

The bulb used in the product is specifically designed for

domestic appliances and is not suitable for general room

lighting within the home (EC Regulation 244/2009).

Light bulbs are available from our After-sales Service.

- Do not handle bulbs with your bare hands as your

fingerprints could damage them. Do not use the oven until

the light cover has been refitted.

This product contains a light source of energy

efficiency class G

CATALYTIC CLEANING

(main oven)

These are panels coated with a special enamel, which

is able to absorb the fat released by food as it cooks.

This enamel is quite strong, so that the various

accessories (racks, dripping pans, etc.) can slide along

them without damaging them. White marks may appear

on the surfaces; these are not a cause for concern.

Nevertheless, the following should be avoided:

-scraping the enamel with sharp objects (a knife, for example);

-using detergents or abrasive materials.

LOWER THE TOP HEATING ELEMENT

The top heating element of the grill can be lowered

to clean the upper panel of the oven: xtract the heating

element from its seating, then lower it. To return the

heating element to its position, lift it up, pull it slightly

towards you and make sure that the tab support is in its

proper seating.

(Only in some models)