A-Neu Video ANI-5.1CH Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Скруббер A-Neu Video ANI-5.1CH. A-Neu Video ANI-5.1CH 6 сторінок. Hdmi 2ch/5.1ch audio extractor

Друкувати сторінку

FRONT PANEL

1) Power and Active LED: With a double color LED when supplying power to this unit the light is red and when it starts to work normally

the light is purple (red and blue mixed).

2) DC/5V: Connect this port to power adapter.

3) HDMI In: Connect this port to HDMI source device.

4) 2.0CH/5.1CH LED: When 2.0CH is being selected it is off and when 5.1CH is being selected it is on.

5) 2.0CH/5.1CH button: Pressing "button" to switch 2.0/5.1CH manually.

BACK PANEL

6) HDMI Out: Connect this port to HDMI Display.

7) SPDIF Out: Connect Toslink or Coaxial port to Ampliﬁ er Receiver.

8)Stereo Out: Connect this port to Ampliﬁ er Receiver.

Note: Only when the source supports 5.1CH output (including CD), this function is effective and it realizes through the 2.1CH/5.1CH

buttons. The product default output is 5.1CH, and LED turns on at the time. Press the button a time again, the product outputs 2CH

audio and the LED turns off. If the source can only supports 2CH audio output, the "2CH/5.1CH" button will become invalid, that is,

although you press "2CH/5.1CH" button, the product still outputs 2CH audio and the LED is still on.

FRONT AND BACK PANEL