A-Neutronics MS-SL12-RD Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Блок розподілу електроенергії A-Neutronics MS-SL12-RD. A-Neutronics MS-SL12-RD 6 сторінок. 17-outlet lcd display power strip 20amp

Друкувати сторінку

LCD DISPLAY METER FUNCTION

METER FUNCTION

RE-SET KWH AND CLOCK

Power cycle unit by turning OFF and then ON again. This will reset the KWH and clock.

SET OvER CURRENT WARNING LEvEL

This power strip is designed to operate at 20Amps. Changing this Over Current Warning Level value does not allow more then the

specified amperage as specified on the product label.

1. Press "SET" button for (3) seconds.

2. Press "FUN" button so display is either 15A or 30A.

3. Press "SET" button to select the new setting.

4. Press "FUN" button to return to normal operation.

(8) FUNCTIONS PROvIDED

Plug in the power strip and it starts to display current power supply status

• voltage

• Amp

• Watt

• vA

• Hz

• PF

• Kwh

• Runtime Clock

No start button required. FUNCTION and SET buttons are located on the right side of the

LCD Display.

OPERATION

1. Plug in the strip, the display shows voltage reading.

2. Press "FNC" button, shows amperage reading.

3. Press "FNC" button again, shows watt reading.

4. Press "FNC" button again, shows VA (apparent power) reading.

5. Press "FNC" button again, shows Hz (frequency) reading.

6. Press "FNC" button again, shows PF (power factor) reading.

7. Press "FNC" button again, shows KWH (kilo watt per hour) reading.

8. Press "FNC" again, shows runtime (clock).

OvER vOLTAGE AND OvER CURRENT WARNING

1. LCD display will show "OUP" when input voltage is over 145V.

2. LCD display will "blink" when input current is over 15A.

FUNCTION

RANGE

Volts

95.0~125 Vrms

Amps

0.00~20.0 Amps

Watts

2500 Watt

2500 VA

Frequency

47.0~63.0Hz

Power Factor

0.00~1.00

KWh

0.00~9999

KWh hour

0.00~9999

ACCURACY

0.2%

0.3%

0.5%

+/- 0.1Hz

0.01%

.5%

30ppm