AEG ULTRAFRESH+ 7000 Посібник користувача - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник користувача для Холодильник AEG ULTRAFRESH+ 7000. AEG ULTRAFRESH+ 7000 36 сторінок.

• There is an adequate distance between the appliance and surrounding walls

• Is the ambient temperature within the range of values specified in the operating manual?

Your refrigerator is operating noisily

The following noises can be heard during normal operation of the appliance.

Cracking (ice cracking) noise occurs:

• During automatic defrosting.

• When the appliance is cooled or warmed (due to expansion of appliance material).

Clicking noise occurs: When the thermostat switches the compressor on/off.

Motor noise: Indicates the compressor is operating normally. The compressor may cause

more noise for a short time when it is first activated.

Bubbling noise and splashing occurs: Due to the flow of the refrigerant in the tubes

of the system.

Water flowing noise occurs: Due to water flowing to the evaporation container. This

noise is normal during defrosting.

Air blowing noise occurs: During normal operation of the system due to the circulation

of air.

There is a build-up of humidity inside the fridge

Check if:

• All food is packed properly. Containers must be dry before being placed in the fridge.

• The fridge doors are opened frequently. Humidity of the room will enter the fridge each

time the doors are opened. Humidity increases faster if the doors are opened frequently,

especially if the humidity of the room is high.

• There is a build-up of water droplets on the rear wall. This is normal after automatic

defrosting (in Static Models).

The doors are not opening or closing properly

Check if:

• There is food or packaging preventing the door from closing

• The door compartments, shelves and drawers are placed properly

• The door gaskets are broken or torn

• Your fridge is level.

The edges of the fridge in contact with the door joint are warm

Especially during summer (warm weather), the surfaces in contact with the door joint may

become warmer during operation of the compressor. This is normal.

EN -32-