AEG A73100GNW0 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера AEG A73100GNW0. AEG A73100GNW0 24 сторінки.

Make sure the door is open and then:

Loosen the upper edge of the grille by

pulling outward/downward.

Pull the grille straight out to completely

remove it.

Vacuum clean under the cabinet.

Defrosting of the freezer

The freezer compartment of this model, on the other hand, is a "no frost" type. This means

that there is no buildup of frost when it is in operation, neither on the internal walls nor on

the foods.

The absence of frost is due to the continuous circulation of cold air inside the compart-

ment, driven by an automatically controlled fan.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

disconnect the appliance from electricity supply

remove all food

clean the appliance and all accessories

leave the door/doors open to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

During operation of the appliance some smaller but annoying trouble can often occur,

which does not require calling a technician out. In the following chart information is given

about them to avoid unnecessary charges on service.

The operation of the appliance goes with certain sounds (compressor and circulating

sound). This not means a trouble, but a normal operation.

The appliance operates discontinuously, so the stopping of compressor does not mean be-

ing no current. That is why you must not touch the electrical parts of the appliance before

breaking the circuit.

Problem

The appliance is noisy.

The buzzer sounds. The

Alarm icon flashing.

Possible cause

The appliance is not supported

properly.

The temperature in the freezer is

too high.

What to do if...

Solution

Check if the appliance stands sta-

ble (all feet and wheels should be

on the floor). Refer to "Levelling".

Refer to "HighTemperature

Alarm".