AEG A75298-SK1 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера AEG A75298-SK1. AEG A75298-SK1 48 сторінок.

Installation

The appliance must be earthed. The power supply cable plug is provided with a contact for

this purpose. If the domestic power supply socket is not earthed, connect the appliance to

a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Directives.

Removing the transport support

Your appliance is equipped with transport support to secure the door during transportation.

To remove them do these steps:

1. Open the door.

2. Remove the transport support from the

door sides.

3. Remove the transport support from the

lower hinge (some models).

Some models are fitted with a silencing pad

under the cabinet. Do not remove this pad.

Install the spacers provided within the accessory bag as shown in the figure.

Install the spacers on the back side of the panel.

When placing the appliance ensure that it stands

level. If necessary adjust the feet using the ad-

justment spanner supplied.

Door alignment is dependent on proper levelling.

The door reversibility is not possible.