AEG A92860GNX0 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера AEG A92860GNX0. AEG A92860GNX0 28 сторінок. Aeg freezer user manual
Також для AEG A92860GNX0: Посібник користувача (24 сторінок), Посібник користувача (24 сторінок)

Друкувати сторінку
AEG A92860GNX0 Посібник користувача
8
Control panel
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.

Ice maker function

The Ice maker is switched on at delivery and starts up automatically when the appliance is
connected to water and power supplies.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
The Ice maker indicator flashes.
2.
Press the OK button to confirm.
The Ice maker indicator is shown.
To switch off the function:
1.
Press the Mode button until the Ice maker indicator flashes.
2.
Press the OK button to confirm.
3.
The Ice maker indicator goes off.

FROSTMATIC function

To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
The FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
The FROSTMATIC indicator is shown.
This function stops automatically after 52 hours.
To switch off the function before its automatic end:
1.
Press the Mode button until the FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
3.
The FROSTMATIC indicator goes off.
The function switches off by selecting a different freezer set temperature.
Minute Minder function
The Minute Minder function is to be used to set an acoustic alarm at the preferred time,
useful for example when a recipe requires to cool down a mixture for a certain lenght of
time, or when a reminder is needed in order not to forget the bottles placed in the freezer
for fast cooling.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30 minutes) for a few seconds.