AEG SANTO C 7 18 40-4I Інструкція з експлуатації та монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Морозильна камера AEG SANTO C 7 18 40-4I. AEG SANTO C 7 18 40-4I 28 сторінок. Integrating fridge freezer
Також для AEG SANTO C 7 18 40-4I: Інструкція з експлуатації та монтажу (15 сторінок), Інструкція з експлуатації та монтажу (28 сторінок), Інструкція з експлуатації та монтажу (24 сторінок), Інструкція з експлуатації та монтажу (25 сторінок), Інструкція з експлуатації та монтажу (28 сторінок), Інструкція з експлуатації та монтажу (32 сторінок), Інструкція з експлуатації та монтажу (32 сторінок), Інструкція з експлуатації та монтажу (14 сторінок), Посібник користувача (44 сторінок)

AEG SANTO C 7 18 40-4I Інструкція з експлуатації та монтажу

Starting Up and Temperature Regulation

Wash the inside of the appliance with lukewarm water with a little bicar-
bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter-
gent as the smell may linger. Dry the appliance thoroughly.
• When the refrigerator compartment door is opened, the internal lighting
is switched on. The temperature control knob is located on the right hand
side of the refrigerator compartment.
Setting "0": Off.
Setting "1": Highest temperature, (warmest setting).
Setting "6" (end-stop) : Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the temperature
inside the refrigerator depends on:
-the quantity of food stored
-how often the door is opened
The temperatures in the refrigerator compartment and freezer compart-
ment cannot be independently regulated.
If you want to freeze fresh food rapidly, select setting "6", ensuring that the
temperature in the refrigerator compartment does not drop below 0°C. You
should reset the temperature control knob to setting "3" or "4", if this does
occur.
As soon as the fresh food placed in the freezer has frozen, return the tem-
perature control knob to "3" or "4".
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on
the temperature regulator (position"5" to "6") can cause the compressor to
run continuously.
If this happens, turn the temperature regulator back to a warmer setting
(position "3" to "4"). At this setting the compressor will be switched on and
off as usual and automatic defrosting recommenced.
8