AEG 740 D Інструкція з експлуатації та монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Вентиляційна витяжка AEG 740 D. AEG 740 D 16 сторінок.

Maintenance and care

• The hood must always be disconnected from the mains power

supply before beginning any maintenance work.

• The purpose of the grease filters is to aspirate grease particles which

form during cooking and it must always be used, either in the

external evacuation or internal recycling function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

Open the metal grease filter

• Pull the drawer all the way out and press the handles Q1/Q2 locking

the grease filter N1,N2 first towards the opposite side and then down.

Fig. 4.

Hand washing

Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when it are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful washing

programme and highest temperature, at least 65°C. Repeat the

process. Refit the grease filters when it are dry.

When washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact on

its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 4